led coral reef full spectrum lighting led aquarium light

Specification:

Introduction:

A7 has 2 size, the small one is A7(Ø126mm/100W), The big one is A7L(Ø151mm/150W). It can be installed with special aluminum alloy bracket, or hang it at the top of ceiling. The distance between lights and water surface is adjustable.

A7 is suitable for a variety of sizes of fish tank, Square tank use one lights only, rectangle tank use 2 or 3 pieces, for bigger tank, cluster of light can be used.

-The outer fixture is integrated with heat sinking panel, also with active heating sinking fans, this is the best heat sinking solution on the market right now.

- Epistar is used for the lights to guarantee high quality of the lights.  We offer 90 degree of the lens, the lighting  are more even and soft.  

- Bracket and hanging kits are used for different kinds of installation, clients have various choices.

- LED driver is UL, GS, FCC certified, this is high quality led driver.  

- The screws are rust-proof.  

- 2.4G remote, controlling can reach 50 meters, The remote can control many lights in the scope.

Spectrum Features :

A7 series LED aquarium light adapt four spectrum of the color mixture, the mixing color is fantastic and nice looking, and the mixing spectrum are also suitable for marine fish, inverts, livestock, seaweed, and Specially good for corals growing.

- The blue wavelength is 450-455nm, the color is very suitable for the growing of the marine plant and other corals. The dark blue produces the fluorescent color for the coral and marine fish and made them look more beautiful and vivid.

- Fiji purple wavelength is 415-420nm, the fluorescence color of the coral and fish are much more outstanding and SPS grow very well. The coral,the fish and the water are much more colorful with purple color. 

- Pink wavelength is 400-840nm, it is full spectrum light which creates natural color like the real sea.

- White light can Promote corals growing better. 

 PPPP

Packing list:

1 x CF-A7/A7L LED Aquarium Grow Light

1 x 2.4G Remote Controller

1 x Power Transformer

1 x Power Cable

Note: The light holder is not included. If you need the light holder, please kindly contact us.

Products display:

Match code :

1. Connect the lights with socket , turn off  power.

2. Press the“SET”button when power is on , the light has 50% brightness, it means code state.

3. Continuously press the "100% " Brightness button " three times ( the middle knob )  ,then 25% brightness and 10% brightness seperately and the lights will flash two times, then it is code successfully.  4. If it does not work then repeat the above steps ( 5 seconds to complete )  

Clear code :

1. connect lights with power ,turn off the power.

2. Press the“SET”button when power is on ,and the light has 50% brightness, it means it is in the code state.

3.Continuously press"DIY"three times, then25% brightness and 10%brightness , the light flash twice, then it  clears  code successfully.

4. If  it does not work, please repeat above step( 5 seconds to complete )

A.If many lights plug in the same socket , the code and clear can be done at the same time.   

B.The remote can control many lights in the scope .

C.2.4G remote, controlling can reach 50 meters.  

Remarks:  

1. After clear, the driver is “open mode”, the controller can control any of the lights.

2. After coding , the driver is “off mode”, only the related controller with code  can control the lights.

3.If you mix the lights, clear all of them, and code them one by one.

4. DIY: Adjust the lighting spectrum you want,and press"DIY"in 3 seconds until the flash , it is saved.

Application:

Welcome sample order for quality test.